Tips on how to maintain your air conditioner

There are a plethora of benefits one can gain if an air conditioner is properly serviced by an expert. A well-maintained air conditioner unit runs efficiently, uses less energy and ultimately costs less to run. 

Routine maintenance tasks can be tackled by the homeowner if only you are aware of the ways it needs to be done. While technical assessments need a professional approach and should be best left to properly trained and licensed air con technicians. 

Safety precautions should be observed by homeowners at all times irrespective of how critical a task could be. If you are going to undertake any task on your outdoor unit, shut the power switch of your main electrical box. 

The routine maintenance that is necessary of effective functioning depends on the age and type of unit you own. And with summer gracing in full-force, it is a wise idea to take extra care of your air conditioning unit so that it does not cause you any problem when you need it the most. 

5 steps to maintain your air-conditioner -

Regular Air Conditioner Service

An annual standard service of your air conditioner is mandatory and best taken as advised by the manufacturer during the given time period. Thereafter, you can consult an air-con expert and understand the need to get it cleaned, serviced or repaired for a smooth functioning. A failure to keep your cooling unit serviced can cost more money in the long run that regular service. 

Use it as required

An over operational air conditioner will shorten its lifetime and eventually provide you with minimum gains to set a cool temperature. If you have a central AC unit, zone the cooling in areas and rooms that you spend most of your time in. 

Using the AC unit to its optimum will further create a significant difference on your electric bills. Moreover, a passage of natural ventilation for a few hours during the day or night will help keep your room to its balanced nature. 

Make Informed Decisions

At the time of purchase, know the features of your air-conditioner. Be well-versed with its different operational modes according to the changing climatic conditions and needs. 

The technical expert can advice you on the the most-suitable mode of operation that is eco-friendly and could cost you less on your electric bills. 

Furthermore, ask about the parts or unit covered under warranty or any guarantees for you to act accordingly incase required. 

Installation Space

Air conditioner installation perth services are available along with many other commercial and residential areas of Australia. This is primarily the most critical stage and needs an expert air con specialist to get the perfect installation done. A thorough check on the inside unit is vital. There should be enough space of about 2 inches away from any furniture, curtains or any kind of block. 

This is essential to ensure so that the efficiency of the cooling is not compromised. 

We highly recommend to take professional care of your unit for an improved shelf life. A clean air conditioner will pave way for a cleaner air through its vents and help you achieve a better air quality for your home. 

Commercial Lighting Design Trends

Lighting is one of the most underrated parts of any home, restaurant, or place. The entire ambiance of a place changes with the right lighting. 202o was a year we all spent most of our time at home, and in order to be at our most efficient, many people had to turn their rooms into offices. And with it came new lighting trends. 

In this blog, we discuss all the lighting trends that we saw in 2020. 

These trends were supported by all commercial electrical contractors and service providers as well as consumers! 

• Energy efficient

This shift toward energy-efficient lighting has been working towards reducing energy waste, curtailing climate change, and enjoying the benefits of a lower energy bill. LED lights have become more affordable because of the demand for them and all households seem to be switching over to this green as well as a cheap option. 

• Adjustable Lighting

Colorful lights, dimmer switches, and adjustable lights have been a great trend this year. With many local technicians installing fixtures in bedrooms of people who prefer a nice night-light, this trend has taken over the holidays too! 

• Fairy-lights 

A lighting trend that needs no electrical technician and no electrical company, this trend has been popular globally. People use these lights as image props, room decorations, photo walls, and more. They make for great ambient lights and with Instagram having its own dedicated hashtag for them this trend seems to be going nowhere! 

• Pendant Lights

Lights that hang from the ceiling have only been seen as chandeliers, but 2020 and Pinterest along with a keen interest in DIYs brought up the pendant lights. These lights are easy to install even without the help of an electrical technician and look very classy and sleek. This trend was taken up by all commercial electrical contractors and now we can see many different designs of these lights.

These trends have changed lights from being a simple basic home appliance towards a statement piece. Lights are now used as decor! The more commercial electrical contractors invest in new light trends the more the people take it up! 

Don’t get zapped because of a faulty safety switch

The entire electrical wiring is controlled and monitored by a safety switch. If there is an imbalance or indifference of any sort, the safety switch automatically disconnects the entire supply of electricity. A minimal reaction is enough for even a few seconds to cut off the power supply in case if a power board is overloaded or trips often. 

Before you opt to call for the electrical services brisbane or any 24-hour electrician to fix your faulty safety switch, make sure you have unplugged every appliance from each socket on your residential property. A tripped safety switch is one of the most common problems for an electrical emergency in Australia. 

In such a situation, electrical companies experience that there is always one switch that is missed by the homeowner to unplug and that is the primary cause the safety switch does not turn on back. 

A safety switch is designed to shield people from fire or electrocution, unlike circuit breakers that are used to protect electrical appliances. Safety switches are of utmost importance specifically for residential, commercial and factory properties. 

In this article, we will briefly discuss what causes the safety switch to keep turning off.

1. Faulty Appliances

Safety switched trip when they tend to detect extra current flow. A damaged appliance causes the additional current which results in a leak. 

The heavy load appliances such as dishwasher, freezer, washing machine are responsible for regular wear and tear. To maintain and use them to the best of their performance is the best way to prevent the safety switch from tripping. 

If the switch goes off, unplug all appliances and insert one at a time to know which one is causing the problem. 

It’s best to keep appliances updated and check the wires regularly for smooth function. 

2. Weather Conditions

Extreme weather like heavy rainfall or lightning strikes can cause damage or trip of the safety switch. It would be worse if the lightning damages the power station supply or power lines of your entire neighbourhood. 

In such situations, It’s best to wait for the climate to settle as this will prevent voltage fluctuations. There is a possibility that rainwater could seep through the electrical items and power points so it’s recommended to wait before you reset. 

3. Consistent Tripping

The continuous turn off of the safety switch is due to several appliances working together at once. If this happens on a consistent basis, a reduce load or current flow is necessary to avoid the tripping. There could be one or two appliances causing the leak but the fact that the safety switch is unable to bear the load, it’s better to take precautionary measures. 

The tripping could damage the switch, therefore, call a 24-hour emergency electrician if you experience this frequently. 

4. Defect in Wiring

A damaged or defective wiring can lead to fluctuations in the electric supply. It is necessary to observe the wiring conditions at least quarterly and immediately replace or repair the damage. 

If in cases where the appliances are not the cause for the safety switch to trip, it is usually faulty wiring that could do major damage to property. 

A Brief Summary: If your circuit breaker has tripped and will not turn back on:

→ Unplug all the appliances, including gas stove igniters. 

→ Check wear and tear, replace wiring if even it has minor damage

→ If you see a flash when you reset, immediately call a licensed electrician.

→ Install safety switch on each circuit of your property to reduce the issue of tripping. 

The cost-effective way to boost workplace health: Fans

The worldwide lockdown due to the Novel Coronavirus has been detrimental to the health and well-being of many. The series of unlock for many nations have not been proven to work for the betterment. However, no country can be kept under a strict lockdown for more than 60 days irrespective of the consequences. Although it may seem that in our country, life before lockdown is gradually paving its way, the effort now has been to boost the employee health at the workplace.

For many of us, it would still be the usual work from home which depends on the distance between the residential and workplace location. But as you are aware, most businesses have resumed in full force after months of contemplation and wait. Health awareness at the workplace has been on the agenda since a while but the focus amid a pandemic is now more than ever. 

The government of many nations including Australia have issued guidelines which address the concerns associated with air conditioners (AC) and need for natural ventilation to curb the spread and increase antibodies to fight any kind of infection. 

According to the compiled guidelines, an AC should operate in the range of 24-30 degrees for residential properties. Perhaps a relative humidity of 45% to 70% is considered to be the most suitable. The humidity helps decrease the problems of pathogens which in turn adds to boost your immune system. 

Furthermore, the recirculation of cool air by the air conditioner should be supported by the outdoor air intake. It is recommended to open the window slightly along with the fan or exhaust or natural ventilation.

Specifically, if we consider workplace facility, special emphasis has been laid to install high volume low-speed fans (HVLS).

You might now wonder if you have installed the right fan? 

Well if you have, you already are one step ahead of the game to keep your employees in a cool ventilated and germ-free environment. 

For those of you who have not invested one such industrial fan yet, you are not alone. The awareness for installing fans has increased during the uncertain pandemic situation which proves to be cost-effective and energy-efficient for a workplace. 

Whether you are working in a manufacturing plant or a dairy factory or a restaurant, the high volume fans are now recognized to be excellent tools to manage the indoor air quality. 

We have listed below the additional benefits to having installed a fan at workplace

 

1. Fresh air intake through a fan will act as a shield for outdoor dust 

2. Exhaust fans in your commercial passage or washroom are recommended to keep operational during complete work hours

3. If your workplace facility has windows installed, we advice you to keep it completely or at least partly open for natural air

4. Research carried out to curb the spread of coronavirus indicates that high temperature and high humidity areas reduce the transmission of the virus. 

5. The best action to limit the spread of infection is to ventilate the indoor areas with maximum outdoor air

We suggest that to make the most of the best kind of ventilation and mechanisms that have proven to be effective, you should take advice from an experienced electrician or an expert professional. Even electrical contractors can help you with the best possible optimum solution. Many factors such as the location of the commercial property and area along with the seating arrangement of employees add to the selection of the right kind of air ventilation for your area. 

Industrial areas like Perth, Melbourne, Brisbane and Sydney have some of the great renowned work facilities which are cost-effective and boost employee productivity to a great extent. Get an expert opinion on how to a ceiling fan installation Brisbane can be done easily just at the ease of your commercial and residential property.

10 Signs Your House Needs Rewiring

 

If you haven’t suspected your wiring for a long time now or purchased a property that requires

attention on wirework, you should consider a rewire option from a master electrician.

There is a high probability that even modern homes could be susceptible to electrification

problems, while older properties might be due for a complete facelift.

Old wires can cause fuses to blow and can force your entire electrical system to trip repeatedly,

especially when you have multiple home appliances operating on a single unit. Although the

fact remains that wiring for any property needs to be safe, secure and meet the legal terms. 

We have shortlisted a few pointers that will alert you to take the necessary action:

• If the property is over 40 years

• Usage of extension chords is frequent

• Only two-spike sockets are available

• Noticeable damage and cracks

   

Read on to know the evident reasons. 

 

1. Consistent fuse rupture

Traditional style fuses are not designed to take the heavy load of modern appliances. An

upgrade to match the current trends is necessary to avoid regular fuse rupture.   

2. Burn or Blaze of any kind

If you observe your wiring to have any burn smell or shorting behind the walls or under your

floor, identify the sources that trigger these actions.

3. Extreme power fluctuations

The frequent fluctuations can cause severe damage to your expensive electronic and laptop

equipment.

4. Earthenware fuses

The contemporary circuit-breakers are an obvious sign that internal wiring requires  to be

updated to adapt with the current electrical standards.

5. The flick or dim of lights

The brighter the lights, the higher will be the voltage. Whereas, dim lights receive too little

voltage. 

6. Discoloured switches

This can be caused by faulty wiring near the outlet that results in a spark. It may lead to a

small fire which leaves discolouration on the surface of the switch.

7. Old cabling

Whether you like it or not, when it comes to wiring “Old is not Gold.” Gradually, they become

dangerous and need immediate replacement. Furthermore, the old wiring ways do not comply

with current safety standards. 

8. Notice spark  you plug or unplug a cord

This maily occurs if there is a major flaw in the writing or very rarely, it could be a problem

with an individual ply.

9. Regular Trip of circuit breakers

If the circuit unit surpasses the number of amps it can manage, the circuit breaker often trips

and eventually the electric flow cuts off. An old or unstable wiring and overloaded circuits

could be primary reasons why this occurs.

10. Bulbs burn out in sockets

The flickering or fluctuation of voltage causes the burn of bulbs in sockets which again is an

indication of a wiring problem.

What to expect when I rewire my property?

It could differ as per the extremity of your situation. Some of you may need new sockets and

light switches or few would require a full rewire if the entire cable needs replacement. The

complete rewiring is of course a huge task that requires plenty of time and patience.

For preparation, take the wall hangings off and make sure the installation team has carried

dust sheets to protect the furniture. The full wiring is usually completed in 4 days, but it could

further delay as per the complexity of the job.

Talking to a qualified professional

Your local electrician or an emergency electrician could sometimes fix the minor

flaws but never take on any electrical work yourself. From a simple residential repair to a full

commercial rewire, talk to the professionals -Quick Spark today to arrange a visit and provide

a quote.